Working Principle of Anode Plate

It consists of anode mounting ears, transition bars, and main board are welded in sequence. It is characterized in that the transition bars are made of tin, silver, cobalt, silicon, antimony, and lead. Rare earth elements are made by dissolving, mixing, casting, cold pressing, shearing, and stamping. Good anti-corrosion performance, used for electrolytic manganese.

Acceptance criteria of anode plate: straight, high strength, strong rigidity, not easy to twist. After-sales range: deformation within the warranty. The domestic standard plates for the anode plate of the electrostatic precipitator are C480mm plate and Z-shaped 385mm plate.

There is a closed cavity in the solenoid valve, and there are through holes in different positions. Each hole leads to a different oil pipe. The middle of the cavity is a valve. On both sides are two electromagnets. Which side of the magnet coil is energized and the valve body will be attracted. To which side, different oil discharge holes are blocked or leaked by controlling the movement of the valve body, and the oil inlet holes are always open, and the hydraulic oil will enter different oil discharge pipes, and then the oil pressure is used to push the oil Piston, the piston drives the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current of the electromagnet.

The anode is made of metal or alloy, and an oxide film is formed on its surface by electrolysis. The metal oxide film changes the surface state and performance, improves its corrosion resistance, enhances wear resistance and hardness, thereby protecting the metal surface.