The choice of the pre-embedded position of the roll forming machine is very important. It must be based on the size of the machine. The selected position must be correct and firm. During installation, it should also reach the strength of the allowable installation to ensure that workers operate. security.
Generally, the ex-factory molding machine has been tested in the factory before leaving the factory. In the process of long-distance transportation or long-term placement without various reasons, the rolling molding machine must be debugged before use, and after the safety work is done to be put into use.
1. It is necessary to check whether the roll forming machine is deformed or damaged during transportation. If there is any, it must be paid attention to before it can be used after maintenance.
2. If the main parts are placed for a long time, there may be signs of loosening and should be checked.
3. Check whether the movable parts of the roll forming machine need to be lubricated to prevent rust, or they cannot be used normally.
4. It should also be checked whether the main engine and the brake are sensitive when working and how fast they respond.
Before the roll forming machine is officially put into use, the machine must be wiped, a certain amount of lubricating oil should be added to the active parts of the machine, and all parts of the assembly relationship should be matched during installation.
Those who are familiar with the rolling forming process know that the high running accuracy of the rolling forming machine is required to achieve good technological results. As far as the many roll forming equipment available in the market are concerned, the following equipment will have high running accuracy:
1. Reasonable approach and separation between the rolling head and the model: If the rolling head of the roll forming machine and the model are in a very reasonable approach, then it can reduce the cumulative error of the equipment movement and reduce the contact by reducing the movement of the equipment. Under the condition that the deformation improves the contact stiffness, the equipment achieves high running accuracy and presents a very good running effect.
2. The structure of important parts is reasonable: how the running accuracy of the roll forming machine has a certain relationship with the various structures of the equipment, especially many important parts in the equipment, it has a great influence on its running accuracy. Therefore, it must be a very reasonable roll forming equipment with a very reasonable structure of the important parts, in order to achieve high running accuracy, and the running effect in the application will be very good.
Only such a rolling forming machine can have a high running accuracy, and can rely on the high-precision optimized operation to present a very good rolling forming process effect.