The equipment produced by our company has an advanced transmission system and overall design. The equipment integrates the hydraulic system and the motor into the host machine, which saves the equipment's space and improves the convenience and safety of the equipment. The electrical components of the equipment are all well-known international brands to ensure the good working performance of the equipment.
The cold bending equipment is mainly composed of unwinding device, feeding guide platform, leveler, punch, roll bending machine, cutting device, discharge rack, hydraulic system, electrical control system and other parts. It has the characteristics of reasonable structure, simple operation, safety and reliability, short production process, and wide product use.
The grape rack pillar molding equipment is made of galvanized sheet, and after several groups of precision rollers are cold-rolled and rolled, the galvanized grape rack pillar profiles produced replace the traditional grape rack cement pillars.
With the progress of the society, the current metal grape stand column has replaced the cement column with many advantages:
Compared to bulky cement columns, metal columns are more convenient to operate and save labor installation costs;
The material is galvanized steel, which has anti-corrosion effect;
For environmental impact, metal grape stand columns are more environmentally friendly than cement columns;
Continuous Z-shaped holes are punched in the length direction of the column, and the height of the wire can be easily adjusted as the grape seedlings grow taller;
Galvanized Steel Vineyard Post C Purlin Roll Forming Machine Technical Requirements:
Operation area: 15X 3.0 X 2.5(length X width X height)m
The direction of feeding: From left to right
Power: 380V, 50Hz, 3 parch
Hydraulic oil: # 46 hydraulic oil
Gear oil : # 18 hyperbolic gear oil
Total power:about 30kw
Material of Galvanized Steel Vineyard Post C Purlin Roll Forming Machine:
Coil Width: Approx. 125mm
Suitable Coil Thickness: 1.5-2.0 mm
Suitable Raw Materials: Q235
Coil inner diameter: Φ508 mm
Piece length: 2m/piece
Produce line:0-25m/min( include punch and cut)
Punching machine
press: JF21-25
Maximum press:25tons
Material of mould: Material:Cr12Mov, Quenching,Hardness:HRC58-62º
Quantity of punching dies:1sets
Roll Forming Machine:
Forming machine
Type:GY120 type
Forming frame:Wall frame +drive by chain
Roller stations:16 stations
Diameter of axle:φ70 mm,45 # steel quenching and tempering treatment
Material of rollers mould:GCr15,Hardening treatment,HRC58-62°
Main power:15 kw