How to Use Metal Roll Forming Machine Correctly

Ⅰ. How to use the metal roll forming machine correctly:

1. Pay attention to the height of the lubricating oil in the sliding box and both sides of the machine.

2. It is strictly forbidden to work beyond the small closed height, that is, the small distance between the bottom surface of the upper sliding box and the working surface is 290mm. The height after the upper and lower molds are required to be added. The thick bottom of the upper and lower backing plates plus the thickness of the tile blanks are not allowed to exceed 290mm. It should be designed in strict accordance with this requirement to avoid machine tool accidents. You should pay attention to the height of the lubricating oil in the sliding box and the sides of the machine from time to time.

Ⅱ. The metal roller forming machine should be wiped frequently to keep it clean, and no muddy water is allowed.

The finished product of C-shaped steel rolled by the metal roll forming machine has good tensile, bending and compression properties, good flatness, automatic fixed-length cutting, automatic punching, high degree of automation, quick and convenient installation, and the product can be used as large and medium-sized industrial and civil buildings. The main force-bearing structure, such as factory buildings, warehouses, and machine garages. The metal roll forming machine is a set of single roll forming unit that can roll to produce a variety of specifications of C-shaped steel sandalwood products.